Pull requests help you collaborate on code with other people. As pull requests are created, they’ll appear here in a searchable and filterable list. To get started, you should create a pull request.

The RP2350 has a few advantages over its predecessor, one of which is the ability to load firmware remotely via UART, as [Thomas Pfister] has documented on his blog and in the video below. [Thomas] ...

Abstract: This article is a comprehensive research paper on the Universal Asynchronous Receiver Transmitter (UART) communication protocol, aiming to familiarize relevant personnel with the principles ...

通用异步接收/发送器（UART）是一种广泛使用的串行通信协议，用于实现设备间的全双工通信。本文将介绍如何使用示波器 ...

NXP’s LPC2148 is an ARM based high-performance 32-bit RISC Microcontroller preloaded with many in-built features and peripherals, In-System Programming (ISP) and In-Application Programming (IAP). It ...

The Geiger-Muller (GM) tube allows a user to measure different types of radiation, including alpha, beta, x, and gamma particles. A GM tube consists of one anode and one cathode enclosed in a ...

PicoUART6 is a small USB to UART bridge board that takes a Raspberry Pi Pico board and exposes six UART ports to connect up to six Raspberry Pi 5 SBC’s over the new 3-pin UART connector. The Raspberry ...

看下面这张图，大家应该已经猜到了今天的主角是UART。 我们通常说的串口，UART包含TTL电平和RS-232电平两种，嵌入式系统里面，单片机的串口一般都是TTL电平。 今天的内容关于UART的帧格式，比较简单，玩过单片机的小伙伴应该都知道。 UART的英文全称是Universal ...

Ollie v2 is an improved version of the Ollie USB to isolated UART, CAN Bus, RS232, and RS485 converter that gains a USB-C port, a plastic case, the ability to set the voltage from the target board, ...